cph5905 no.7177-1/6 sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn7177a cph5905 npn epitaxial planar silicon transistor n-channel silicon junction fet high-frequency amplifier. am amplifier. low-frequency amplifier applications features ? composite type with j-fet and npn transistors contained in the cph5 package, improving the mounting efficiency greatly. ? the cph5905 contains a 2sk3557-equivalent chip and a 2sc4639-equivalent chip in one package. ? drain and emitter are shared. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit [fet] drain-to-source voltage v dsx 15 v gate-to-drain voltage v gds --15 v gate current i g 10 ma drain current i d 50 ma allowable power dissipation p d mounted on a ceramic board (600mm 2 5 0.8mm) 350 mw [tr] collector-to-base voltage v cbo 55 v collector-to-emitter voltage v ceo 50 v emitter-to-base voltage v ebo 6v collector current i c 150 ma collector current (pulse) i cp 300 ma base current i b 30 ma collector dissipation p c mounted on a ceramic board (600mm 2 5 0.8mm) 350 mw [common ratings] total dissipation p t mounted on a ceramic board (600mm 2 5 0.8mm) 500 mw junction temperature tj 150 c storage temperature tstg --55 to +150 c marking : 1e any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. 62005ac ms im tb-00001552/ 22802 ts im ta-3495
cph5905 no.7177-2/6 electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit [fet] gate-to-drain breakdown voltage v (br)gds i g =--10 m a, v ds =0v --15 v gate cutoff current i gss v gs =--10v, v ds =0v --1.0 na cutoff voltage v gs (off) v ds =5v, i d =100 m a --0.4 --0.7 --1.5 v drain current i dss v ds =5v, v gs =0v 10.0* 32.0* ma forward transfer admittance ? yfs ? v ds =5v, v gs =0v, f=1khz 24 35 ms input capacitance ciss v ds =5v, v gs =0v, f=1mhz 10.0 pf reverse transfer capacitance crss v ds =5v, v gs =0v, f=1mhz 2.9 pf noise figure nf v ds =5v, rg=1k w , i d =1ma, f=1khz 1.0 db [tr] collector cutoff current i cbo v cb =35v, i e =0a 0.1 m a emitter cutoff current i ebo v eb =4v, i c =0a 0.1 m a dc current gain h fe v ce =6v, i c =1ma 135 400 gain-bandwidth product f t v ce =6v, i c =10ma 200 mhz output capacitance cob v cb =6v, f=1mhz 1.7 pf collector-to-emitter saturation voltage v ce (sat) i c =50ma, i b =5ma 0.08 0.4 v base-to-emitter saturation voltage v be (sat) i c =50ma, i b =5ma 0.8 1.0 v collector-to-base breakdown voltage v (br)cbo i c =10 m a, i e =0a 55 v collector-to-emitter breakdown voltage v (br)ceo i c =1ma, r be = 50 v emitter-to-base breakdown voltage v (br)ebo i e =10 m a, i c =0a 6 v turn-on time t on see specified test circuit. 0.15 m s storage time t stg see specified test circuit. 0.75 m s fall time t f see specified test circuit. 0.20 m s * : the cph5905 is classified by i dss as follows : (unit : ma) rank gh i dss 10.0 to 20.0 16.0 to 32.0 the specifications shown above are for each individual fet or a transistor. package dimensions electrical connection unit : mm 7017-007 switching time test circuit 5 3 12 4 1 : collector 2 : gate 3 : source 4 : emitter/drain 5 : base top view 2.9 0.95 0.05 12 3 4 5 0.2 0.7 0.9 2.8 1.6 0.6 0.6 0.2 0.4 0.15 1 : collector 2 : gate 3 : source 4 : emitter/drain 5 : base sanyo : cph5 v r 1k w v cc =20v v be = --5v + + 50 w input output r l 2k w 220 m f 470 f pc=20 m s i b1 d.c. 1% i b2 10i b1 = --10i b2 =i c =10ma
cph5905 no.7177-3/6 0 0 i d -- v ds 20 16 12 8 4 0.4 0.8 1.2 1.6 2.0 2.4 itr02749 i d -- v ds --0.1v v gs =0v --0.2v --0.3v --0.4v --0.5v --0.6v --0.7v 0 0 20 16 12 8 4 24681012 --0.1v v gs =0v --0.2v --0.3v --0.4v --0.5v --0.6v --0.7v itr02750 drain-to-source voltage, v ds -- v drain-to-source voltage, v ds -- v drain current, i d -- ma drain current, i d -- ma [fet] [fet] it04227 ciss -- v ds it04228 v gs (off) -- i dss 7 10 23 5 3 3 2 1.0 7 5 v ds =5v i d =100 m a 72357 23 3 3 1.0 10 10 5 7 2 v gs =0v f=1mhz drain current, i dss -- ma cutoff voltage, v gs (off) -- v drain-to-source voltage, v ds -- v input capacitance, ciss -- pf [fet] [fet] i d -- v gs it04224 i d -- v gs itr02752 --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0.2 0 22 20 18 16 14 12 10 8 6 4 2 20ma i dss =30ma 15ma 10ma --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0.2 0 4 2 6 8 12 10 14 16 75 c v ds =5v i dss =15ma 25 c ta=--25 c v ds =5v gate-to-source voltage, v gs -- v [fet] [fet] drain current, i d -- ma gate-to-source voltage, v gs -- v drain current, i d -- ma ? y fs ? -- i d it04225 ? y fs ? -- i dss it04226 10 5 3 7 2 3 5 7 3 1.0 10 7 5235723 5 2 v ds =5v f=1khz i dss =15ma 30ma 7 10 23 5 10 2 3 5 7 100 v ds =5v v gs =0v f=1khz [fet] [fet] drain current, i d -- ma forward transfer admittance, ? yfs ? -- ms drain current, i dss -- ma forward transfer admittance, ? yfs ? -- ms
cph5905 no.7177-4/6 crss -- v ds it04229 nf -- f itr02758 73 5 10 1.0 2 10 2 357 7 5 3 2 1.0 7 v ds =0v f=1mhz 10 8 6 4 2 0.01 2 0.1 1.0 10 100 0 3 5 7 2 3 5 7 2 3 5 7 2 3 5 7 v ds =5v i d =1ma rg=1k w drain-to-source voltage, v ds -- v reverse transfer capacitance, crss -- pf frequency, f -- khz noise figure, nf -- db [fet] [fet] 50 30 20 40 10 45 25 15 35 5 0 0 0.4 1.0 0.8 0.6 0.2 0.3 0.9 0.7 0.5 0.1 i c -- v ce [tr] [tr] [tr] [tr] 50 m a 100 m a 150 m a 200 a 250 m a 300 m a 350 m a 400 m a 450 m a 500 m a itr10376 020 50 40 10 30 15 45 35 525 i c -- v ce itr10377 12 10 6 4 8 2 0 ta=75 c --25 c 100 3 2 7 5 1000 2 7 5 3 0.1 3 25 1.0 3 23 25 100 3 2 5 10 h fe -- i c 25 c v ce =6v itr10379 ta=75 c --25 c 160 120 140 20 80 100 40 60 0 v ce =6v 25 c 0 0.2 0.4 0.8 0.6 1.0 1.4 1.2 i c -- v be itr10378 i b =0 m a 10 m a 15 m a 20 m a 25 m a 30 m a 35 m a 40 m a 45 m a 50 m a 5 m a i b =0 m a collector-to-emitter voltage, v ce -- v collector current, i c -- ma collector-to-emitter voltage, v ce -- v collector current, i c -- ma base-to-emitter voltage, v be -- v collector current, i c -- ma collector current, i c -- ma dc current gain, h fe nf -- rg itr02759 it09866 p d -- ta 10 8 6 4 2 0.1 2 1.0 10 100 1000 0 3 5 7 2 3 5 7 2 3 5 7 2 3 5 7 v ds =5v i d =1ma f=1khz signal source resistance, rg -- k w noise figure, nf -- db ambient temperature, ta -- c allowable power dissipation, p d -- mw [fet] [fet] 0 20 40 60 80 100 120 140 160 0 100 50 200 300 150 250 350 400 mounted on a ceramic board (600mm 2 5 0.8mm)
cph5905 no.7177-5/6 [tr] [tr] 3 100 2 5 7 3 2 5 7 1.0 10 52 7 3 2 100 57 3 2 3 1.0 10 2 3 2 5 5 7 1.0 10 57 57 3 2 f t -- i c itr10380 cib -- v eb itr10381 v ce =6v f=1mhz collector current, i c -- ma gain-bandwidth product, f t -- mhz emitter-to-base voltage, v eb -- v input capacitance, cib -- pf p c -- ta it09867 [tr] [tr] 1.0 7 23 5 7 22 35 10 100 5 3 1.0 10 7 5 3 2 7 v be (sat) -- i c i c / i b =10 itr10384 75 c ta= --25 c 25 c [tr] [tr] 3 10 2 3 2 5 5 7 1.0 5 7 1.0 10 57 57 3 2 100 57 3 2 cob -- v cb itr10382 f=1mhz 1.0 7 23 5 7 22 35 10 100 5 3 2 0.1 1.0 7 5 3 2 3 2 7 v ce (sat) -- i c i c / i b =10 itr10383 25 c ta=75 c --25 c collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- ma collector-to-emitter saturation voltage, v ce (sat) -- v collector current, i c -- ma base-to-emitter saturation voltage, v be (sat) -- v ambient temperature, ta -- c collector dissipation, p c -- mw 0 20 40 60 80 100 120 140 160 0 100 50 200 300 150 250 350 400 mounted on a ceramic board (600mm 2 5 0.8mm)
cph5905 no.7177-6/6 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of june, 2005. specifications and information herein are subject to change without notice. ps
|
